3D model

Tee and Y-branch assembly

Explore the connections of a tee and a Y-branch. Sections, angles and airflow belong to a demonstration model.

Animated illustration of flow direction. Not a fluid simulation or performance test.

Demonstration model

Drag to rotate, pinch or scroll to zoom, tap a part to open its sheet.

Demonstration geometry: these dimensions illustrate the model and are not LIBALSTAL specifications.

Part sheet

Select a part in the 3D view or in the list.

Straight duct

Inlet duct

Demonstration model

Demonstration geometry

Section (W × H): 400 × 300 mm
Length: 450 mm

Demonstration geometry: these dimensions illustrate the model and are not LIBALSTAL specifications.

Product characteristics

Dimensions: Made to measure; standard lengths 1 m and 1.25 m
Material: Galvanised steel sheet
Thickness: 0.4 to 2 mm
Finish: Specification pending
Standard: Specification pending

Product sheet: Rectangular duct

Values are shown only once verified by Libalstal.

Description

Specification pending

Request a quote

Tee

Tee with take-off

Demonstration model

Demonstration geometry

Section (W × H): 400 × 300 mm
Length: 700 mm
Take-off section (W × H): 250 × 200 mm
Take-off length: 180 mm

Demonstration geometry: these dimensions illustrate the model and are not LIBALSTAL specifications.

Product characteristics

Dimensions: Specification pending
Material: Specification pending
Thickness: Specification pending
Finish: Specification pending
Standard: Specification pending

Product sheet: Tees, take-offs & Y-branches

Values are shown only once verified by Libalstal.

Description

Specification pending

Request a quote

Y-branch fitting

Demonstration model

Demonstration geometry

Section (W × H): 400 × 300 mm
Trunk length: 600 mm
Take-off section (W × H): 250 × 300 mm
Take-off length: 550 mm
Angle between branches: 90°

Demonstration geometry: these dimensions illustrate the model and are not LIBALSTAL specifications.

Product characteristics

Dimensions: Specification pending
Material: Specification pending
Thickness: Specification pending
Finish: Specification pending
Standard: Specification pending

Product sheet: Tees, take-offs & Y-branches

Values are shown only once verified by Libalstal.

Description

One inlet divides into two angled branches. Geometry and airflow direction are illustrative and do not constitute an HVAC design.

Request a quote

Straight duct

Tee outlet duct

Demonstration model

Demonstration geometry

Section (W × H): 250 × 200 mm
Length: 450 mm

Demonstration geometry: these dimensions illustrate the model and are not LIBALSTAL specifications.

Product characteristics

Dimensions: Made to measure; standard lengths 1 m and 1.25 m
Material: Galvanised steel sheet
Thickness: 0.4 to 2 mm
Finish: Specification pending
Standard: Specification pending

Product sheet: Rectangular duct

Values are shown only once verified by Libalstal.

Description

Specification pending

Request a quote

Straight duct

Y outlet — branch 1

Demonstration model

Demonstration geometry

Section (W × H): 250 × 300 mm
Length: 350 mm

Demonstration geometry: these dimensions illustrate the model and are not LIBALSTAL specifications.

Product characteristics

Dimensions: Made to measure; standard lengths 1 m and 1.25 m
Material: Galvanised steel sheet
Thickness: 0.4 to 2 mm
Finish: Specification pending
Standard: Specification pending

Product sheet: Rectangular duct

Values are shown only once verified by Libalstal.

Description

Specification pending

Request a quote

Straight duct

Y outlet — branch 2

Demonstration model

Demonstration geometry

Section (W × H): 250 × 300 mm
Length: 350 mm

Demonstration geometry: these dimensions illustrate the model and are not LIBALSTAL specifications.

Product characteristics

Dimensions: Made to measure; standard lengths 1 m and 1.25 m
Material: Galvanised steel sheet
Thickness: 0.4 to 2 mm
Finish: Specification pending
Standard: Specification pending

Product sheet: Rectangular duct

Values are shown only once verified by Libalstal.

Description

Specification pending

Request a quote

Parts in the assembly

Send your drawings. We price the metal.

A three-step form with a review before sending. PDF, DWG or DXF drawings accepted.

Start a quote request